Fully automatic battery charger detects 6-Volt or 12-Volt, reverse polarity, overcharge and short circuit protection. Tests the battery to determine if it is good or bad
Easy to read LED lights indicate power on, 6-Volt or 12-Volt selection, 2-Amp or 4-Amp charge rate and battery charge status; complete with color-coded alligator clip leads and color-coded quick disconnect battery terminals
6-Volt mode has a bulk charge rate of 2-Amps and the 12-Volt mode has a charge rate of 2-Amps and 4A selections
A float charge of 1.5-Amps is used for absorption: A constant high current for extended periods of time can damage a battery. To rectify this issue, constant 1.5-Amp low charging current is given until the battery is fully charged (13.6-Volts)
The charger monitors the battery voltage. If a 12-Volt battery voltage falls below 12.8-Volts (6-Volt battery falls below 6.2-Volts) the charger automatically restarts the charging cycle; the maintenance charging cycle is repeated indefinitely thus allowing the charger to stay connected worry free
Recovery mode is used to revive batteries that are not completely dead but have fallen below 8-Volts. The recovery mode charges at a constant 1.5-Amps. The recovery process automatically switches to the regular charging mode when the voltage reaches 10.5-Volts; the charger will then automatically switch from charge mode to maintenance mode when the battery is fully charged
Sleek, durable composite housing for long service life
Power on indicator (red LED light)
Battery voltage indicator (6-Volt or 12-Volt automatic selection) (solid red LED light will indicate battery voltage – If the battery is bad, the light will flash)
Reverse polarity indicator (red LED light will warn if the battery connections are reversed)
Charge current indicator (use the MODE button to select between 2-Amps or 4-Amps)
Charge indicator (red LED light indicates the battery is charging – green LED light indicates fully charged battery)
