Fully automatic battery charger detects 6V or 12V, reverse polarity,
overcharge and short circuit protection. Tests the battery to determine
if it is good or bad
Easy to read LED lights indicate power on, 6V or 12V selection, 2AMP
or 4AMP charge rate and battery charge status. Complete with colorcoded
alligator clip leads and color-coded quick disconnect battery
terminals
6V mode has a bulk charge rate of 2A and the 12V mode has a charge
rate of 2A and 4A selections
A float charge of 1.5A is used for absorption: A constant high current
for extended periods of time can damage a battery. To rectify this issue,
constant 1.5A low charging current is given until the battery is fully
charged (13.6V)
The charger monitors the battery voltage. If a 12V battery voltage falls
below 12.8V (6V battery falls below 6.2V) the charger automatically
restarts the charging cycle. The maintenance charging cycle is repeated
indefinitely thus allowing the charger to stay connected worry free
Recovery mode is used to revive batteries that are not completely dead
but have fallen below 8V. The recovery mode charges at a constant
1.5A. The recovery process automatically switches to the regular
charging mode when the voltage reaches 10.5V. The charger will then
automatically switch from charge mode to maintenance mode when
the battery is fully charged
Sleek, durable composite housing for long service life
Power on indicator (red LED light)
Battery voltage indicator (6v or 12v automatic selection) (solid red
LED light will indicate battery voltage – If the battery is bad the light
will flash)
Reverse polarity indicator (red LED light will warn if the battery
connections are reversed)
Charge current indicator (use the MODE button to select between
2A or 4A)
Charge indicator (red LED light indicates the battery is charging –
green LED light indicates fully charged battery)
