The push frame accepts many sizes of metal plow (50’’, 54’’, 60’’ and 66’’)
in addition of the plastic plow and the bucket. It has a lifting capacity of 11‘‘
from the ground which is comparable to the CnG1 without articulation.
This push frame cannot be used with an extension for tracked vehicles.
However, it is possible to have replacement parts for the push frame.
Universal mount plate 60% to 75% of ATV
More compact mount system reduces ground clearance loss
Manuel adjustment for angular rotate system of 25 degrees left and right side
Clever pedal system avoids leaning over to handle the plow
Can be easily installed in 15 seconds
Use with all CNG2 blades and brackets
Do not exceed a speed of 8km/h (5 mph)
The height to lift is similar to CNG1
NOTE: When the drift cutters are installed, the vehicle’s speed should not exceed (5 km/h - 3.1 mph) to
avoid damaging the plow and the drift cutters.
The use of the drift cutters is not recommended for shoveling when the snow in the form of ice.
Avoid all front and bias impacts with drift cutters to prevent damage.
