If you are unsure of the diameter of the tubing on which you’d like to install the highway pegs and don’t have a dial at your disposal, here is an easy way to figure it out. You’ll need a piece of heavy paper or cardboard, a ruler, a pencil and a scissors. Use the pencil and ruler to make two marks on the edge of the paper 1” apart. Take the scissors and cut lines perpendicular to the edge of the paper at the marks you just made. Fold the resulting flap of paper out of the way. Next, take the piece of paper to the bike and check to see if the tubing will slip into the opening you’ve made in the edge of the paper. If the opening is too small, repeat the procedure enlarging the opening to 1 1/8”, 1 1/4”, 1.35” and 1 1/2” until you find the one that will fit.
Undeniably the best highway peg available for the GL1800
Sturdy 2-piece clamp assembly is easily installed and locates the swingarm mount point high and tight for excellent cornering clearance
With numerous footrest options and a wide rangeof adjustability
