The HelmetSecure™ lock attaches permanently to a round handlebar, another bar (cruisers and standards), or the triple clamp stem nut (sportbikes), so you only need to fit it once. After that, the lock is always available for use, without having to carry or store it. The lock incorporates an integral, pre-coiled, steel cable to go through the face of the helmet or D-ring and back into the lock. The key lets you unbolt the lock from the handlebar. The design makes the bolts that secure the lock to the handlebar/triple clamp inaccessible when the cable is locked, so the locking mechanism locks the cable and prevents the lock from being removed from the bike. Locking your helmet to the center of your handlebar or triple clamp means the helmet rests high on the bike, away from dirty/hot exhausts, and usually upright to keep rain out. Two models are available; the Classic (for cruiser, standard, and touring bikes) and the Sportbike Lock (for sportbikes).
Sportbike Lock:
The Sportbike lock comes with a replacement stem nut – simply replace the stock stem nut and, using the included Allen key, bolt the lock around the stem nut. You will also need a wrench to fit the 36mm stem nut.
Classic Lock:
The Classic HelmetSecure™ lock has two rubber inserts so it can be fitted, as standard, to the commonly-sized handlebars or other bars (7/8", 1", and 1-1/4" diameter). Allen key included – no other tools are needed.
